Latest revision as of 18:46, 31 May 2023

Installing the SSSMCK

Please visit the Installation page for more information!

Controlling the SSSMCK

For most users, it will be as simple and plugging in the input sensor and SSSMCK then driving away. For other users, you may wish to tune the unit for a new sensor, vehicle, or even for performance.

You can read about the operation and control of the SSSMCK on the BUOY page!

LED Display

The SSSMCK has an LED that displays operation and errors, internal error checking that can output specific codes to Buoy for diagnostics, dynamic short-term and long-term corrections, and the ability to tune various parameters.

In all versions UNTIL R019, the LED normally operates in fader mode, where it's color is directly related to airflow rate. It will be green at low flow and fade to blue at higher flow rates. It will illuminate red if an error is detected.

Starting with hardware R019 the LED now only displays the current operating mode of the unit, or illuminates red upon detecting any errors.

The R019 LED looks like this:

R019 LED

LED Color Chart (R019)
LED Color	LED Color	Meaning
	Green	The unit is operating normally.
	Red	There is an active error. Please connect to Buoy to read any available error codes.
	Yellow	The SSSMCK is waiting on a command from Buoy.
	Orange	Power supply issue (over- or under-volting). Please contact us.
	Blue	The unit is starting. This should only be illuminated for a fraction of a second during startup. If this stays illuminated, try resetting the unit.
	Purple	Buoy is reading from the SSSMCK.
	Pink	Buoy is writing to the SSSMCK.

Gauges and add-ons

We offered a few options on earlier versions, from R006-R0012, but have discontinued gauges from the time-being. If you need assistance with a gauge, please contact us directly.

@@ Line 1: / Line 1: @@
+=Installing the SSSMCK=
+Please visit the [[SSSMCK/Installation|Installation page]] for more information!
+=Controlling the SSSMCK=
+For most users, it will be as simple and plugging in the input sensor and SSSMCK then driving away. For other users, you may wish to tune the unit for a new sensor, vehicle, or even for performance.
+You can read about the operation and control of the SSSMCK on the [[SSSICK/BUOY|BUOY]] page!
+=LED Display=
 The SSSMCK has an LED that displays operation and errors, internal error checking that can output specific codes to Buoy for diagnostics, dynamic short-term and long-term corrections, and the ability to tune various parameters.
-=LED Display=
+In all versions UNTIL R019, the LED normally operates in fader mode, where it's color is directly related to airflow rate. It will be green at low flow and fade to blue at higher flow rates. It will illuminate red if an error is detected.
-In all versions UNTIL R019, the LED normally operates in fader mode, where it's color is directly related to MAF flow rate. It will be green at low flow and fade to blue at higher flow rates. It will illuminate red if an error is detected.
 Starting with hardware R019 the LED now only displays the current operating mode of the unit, or illuminates red upon detecting any errors.
+The R019 LED looks like this:
+[[File:Sssmck_led_example.png|thumb|center|R019 LED]]
 {| class="wikitable" style="margin:auto"
 |+ LED Color Chart (R019)
@@ Line 10: / Line 20: @@
 ! LED Color !! LED Color !! Meaning
 |-
-| [[File:Mck led grn.png]] || Green || The unit is operating normally.
+| [[File:Mck led grn.png|200px]] || Green || The unit is operating normally.
 |-
-| [[File:Mck_led_red.png]] || Red|| There is an active error. Please connect to Buoy to read any available error codes.
+| [[File:Mck_led_red.png|200px]] || Red|| There is an active error. Please connect to Buoy to read any available error codes.
 |-
-| [[File:Mck_led_ylw.png]] || Yellow|| The SSSMCK is waiting on a command from Buoy.
+| [[File:Mck_led_ylw.png|200px]] || Yellow|| The SSSMCK is waiting on a command from Buoy.
 |-
-| [[File:Mck_led_org.png]] || Orange || Power supply issue (over- or under-volting). Please contact us.
+| [[File:Mck_led_org.png|200px]] || Orange || Power supply issue (over- or under-volting). Please contact us.
 |-
-| [[File:Mck_led_blu.png]] || Blue || The unit is starting. This should only be illuminated for about 0.01 seconds during startup. If this stays illuminated, try resetting the unit.
+| [[File:Mck_led_blu.png|200px]] || Blue || The unit is starting. This should only be illuminated for a fraction of a second during startup. If this stays illuminated, try resetting the unit.
 |-
-| [[File:Mck_led_prp.png]] || Purple || Buoy is reading/writing to the SSSMCK.
+| [[File:Mck_led_prp.png|200px]] || Purple || Buoy is reading from the SSSMCK.
 |-
-| [[File:Mck_led_pnk.png]] || Pink|| Buoy is reading/writing to the SSSMCK.
+| [[File:Mck_led_pnk.png|200px]] || Pink|| Buoy is writing to the SSSMCK.
 |}
 =Gauges and add-ons=
 We offered a few options on earlier versions, from R006-R0012, but have discontinued gauges from the time-being. If you need assistance with a gauge, please contact us directly.
-=Error Codes=
-The SSSMCK is capable of displaying a number of error codes that can tell you exactly what, if any, issue it is experiencing. All systems have self-checks coded-in, and if anything is out of specification or an item fails, the SSSMCK will know immediately. An LED that is illuminated red is an easy way to tell if there are any issues.
-=Tuning=
-Tuning from within Buoy is currently in alpha-stages, it will be available publicly soon!
-==Parameters==
-*MAF
-*VAM
-*Averaging
-*Manual Correction
-*Dynamic Correction
-*Custom LED Color
-==Reset to default values==
-If you ever have trouble, you can easily reset everything to default values from within Buoy. Instructions will be available with the release of the next version of Buoy.