SSSICK
Introduction
The SSSMCK (SSSQUID MAF CONVERSION KIT) is the first and only retail-level kit that not only properly reads and filters a MAF signal for use with a stock ECU and tune, but also allows live data-logging with our Buoy application.
You can find the kit for purchase HERE
Hardware
At the moment the kit is in pre-release format. What this means is that it uses 3D-printed components along with early software and hardware. While it works perfectly well for most applications, there may be small bugs or glitches we are still working on. Please keep this in mind and CONTACT US with any issues or bugs you encounter!
You can find the kit for purchase HERE
Fuse Choice
The units are provided with a blade fuse of either 2 or 3 amp rating. It is recommended to use no less than 2 amp and no more than 3 amp rated fuses. The unit should draw between 0.25 to 1.00 amp (depending on sensor used).
On hardware version R01805 and newer the unit has an internal resettable fuse, so the external powerline blade fuse is not as import as earlier versions, but the same rating (between 2-3 amp) should still be used.
Software
The software used to control the SSSMCK is an all-in-one data-logging and flashing tool called Buoy. You can read more about it here: SSSMCK/BUOY
Firmware
The firmware files we offer contain both the software and MAF/VAM calibrations.
Because of how often we are updating firmware, it's best practice to CONTACT US for the latest available. Please include your hardware revision (or order #), the MAF you are using, and which VAM your ECU is setup to work with.