Forced Induction
Introduction
Fueling
Power
Intake Airflow Sensors
Any intake metering device needs to be within the intake track of the turbo (know as "draw thru" or "pull thru"). DO NOT place your intake metering device (VAM, MAF, HFM, etc) in the charge-pipe (known as "blow thru") unless it is a specifically designed piece of hardware that can properly read a pressurized system.
Manifold Air Pressure Sensors
MAP (Manifold Air Pressure) sensors can be added to most any Motronic ECU through a piggyback converter board (available here)
Alpha-N
Alpha-N is a tuning solution utilizing the TPS (throttle position sensor) and vehicle RPM. This is not a good tuning solution for turbocharged vehicles, and is also a poor solution, but to a lesser degree, for supercharged vehicles.